How much does flooring cost
Redoing the floors in a room is a common remodeling project for those who like to do it themselves. A lot of home improvement projects can not be done yourself and the labor costs can be quite high. So instead of paying tile flooring cost and having somebody do it for you, why not just do it yourself?
It can seem daunting at first as there is a lot involved when replacing old flooring. You have to tear up the old floor, clean the base, dispose of the old flooring, set the new floor and make sure you do all of this without making any major mistakes. However it is not actually that hard.
There is a lot involved and it can be very time consuming, but setting up your own tile flooring is very formulaic and you can simply follow step by step instructions to get through it. This can be made even easier if you have a friend or two to help you out.
The steps you should go through are as follows:
1. Tear up the old flooring. I will not go into detail for that as there are plenty of other articles regarding that, but obviously it is the first step in your floor remodeling efforts.
2. Draw a layout. Once the old floor is removed you should take chalk and measure out the tiles you want. Draw the pattern you want as well. If you do all the proper measurements you can know the tile flooring cost for the amount of tiles you will need.
3. Check the base floor. If the base is not perfectly flat and rigid, it can leave problems for your tile down the road. Use laser leveling tools and the like to check. If your base is not level use cement boards to compensate before laying down your tile.
4. Clean the base. If the base floor has stuff on it, the adhesive will not stick properly. So before going through and laying your tiles make sure the area is as clean as you can get it.
5. Start from the middle. To improve the aesthetics of your tile flooring you want to start from the center of the room and head out. This way any cut tiles will be on the edges. You want the corner tiles to be the same size if possible.
6. Lay out the tiles first. Place all the tiles without adhesive just to get a feel for what it will look like. You can also figure out how many tiles you need to cut which you can then take to a professional. The tile flooring cost should not be that great as all they are doing is making the cuts for you.
7. Practice grouting. The grout of a tile floor will make or break the appearance of the whole room. So before you delve in set aside a few tiles to practice, so when it comes time for the real deal you know what to do.
8. Seal the grout. The final step is to seal the grout, this will prevent it from absorbing dirt and grime and keep it nice for much longer.